Click here to go back to the engine page.

The picture on the left is the PT Cruiser AC bracket that I used after the modified Neon one bit the dust. The ones on the right and below are of the modified PT Cruiser bracket that was custom made by Eric Vandyke from Seattle, Washington. Basically all that Eric did was make a shim for the Neon PS pump, modify the hole on the bottom of the bracket for adjustment, and weld on a new leg for stability. It looks really good and it should solve the problems with the previous bracket. Only thing about the bracket is if you use it and modify it in the same manor and also use the PT AC bracket you will run into the issue of the new leg wanting to use the same screw boss that the upper leg of the AC bracket was designed to use. Granted it shouldn't be an issue but I figured I would mention it just incase.

Click here to go back to the engine page.